- Integrated screw feeding system with automatic start of the hopper movement when operating
- Screwdriving unit vertically fixed to the stand (distance 145 mm)
- Workpiece height (screwing level) may vary between 35 and 95 mm above the base plate
- Constant screwdriving depth for all materials, independent the workpiece height due to the automatic depth of drive control
- Manual operation by treadle (alternatives on request)
- Screwdriving cycle time to insert one self-drilling screw (3,9 x 19 mm) for reinforcement fixing approx. 2 seconds
- Feed capacity 30 to 80 screws per minute depending on screw dimensions
Screw dimensions |
Motordata |
Head diameter: 6,0 – 9,0 mm | Max. speed: 2400 min -1 |
Shaft diameter: 3 – 4,5 mm | Max. power: 360 W |
Length: 13 – 45 mm | Min. torque: 5,9 Nm |
Special dimensions on request
Special equipment:
- Horizontal clamping device (ADS-2390RD) for profiles, continuously adjustable ( DOWNLOAD PDF)
- Depth sensor (ADS-1968RD) for screws to be inserted in narrow grooves ( DOWNLOAD PDF)