1. Home
  2. Stationary Screwdrivers
  3. ADS-DE1/1

ADS-DE1/1

The model ADS-DE1/1 is a stationary twin screwdriver unit with two separate advancing units and integrated screw feeder e.g. to fix the reinforcement in two PVC profiles at the same time.
  • Screwdriver units vertical arranged in front of the stand
  • Distance between the screwdriver units: 48 up to 110 mm synchronous adjustable from central point by hand wheel
  • Workpiece height (screwing level) can vary up to 85 mm
  • Constant screwdriving depth for all materials and independent of the workpiece height by the automatic depth of drive control
  • Fitted with clamping device, continuously adjustable
  • Front (right) screwdriver unit is disconnectable
  • Input signals: start: electrical and manual, reset: electrical and manual; screwdriver selector: manual
  • Automatic start of the hopper movement when operating
  • Automatic shut down in case of pressure loss under 5 bar
  • Screwdriving cycle time to insert two self-drilling screws (3,9×19 mm) for reinforcement fixing less than 3 seconds
  • Feed capacity 30 to 80 screws per minute
Screw dimensions
Motordata
Head diameter: 6,0 – 9,0 mm Max. speed: 2400 min -1
Shaft diameter: 3 – 4,5 mm Max. power: 360 W
Length: 13 – 45 mm Min. torque: 5,9 Nm

Special dimensions on request

Special versions:

  • Rear screwdriving unit instead of the front one disconnectable
  • Base plate of the screwdriver advancing units left side attached

Accessories:

Found in Productgroup: Stationary Screwdrivers